ITEMS REQUIRED-INSTALL IHC WITH STANDARD HEADSET

IHC Fork, IHC- Shim, Bolt & Compression ring, Integrated scooter deck, 1 1/8 Intergrated headet & 5MM Allen key. 

Step 1.Slide one of the bearings from the Integrated headset over the fork arm- flat side down. 

Step 2. Insert fork into the bottom of the deck headtube. 

Step 3. Place the other bearing from the Integrated headset into the top of the deck headtube-flat side up. 

Step 4. Slide the IHC Compression ring over the fork (Flat side up)  so it fits snug between the bearing and the fork. 

Step 5. Slide the IHC shim over the fork (tapered rim at top) so it sits on top of IHC compression ring. 

Step 6. Insert the IHC bolt into the top of the fork and hand tighten.

Step 7. Slide the headset dust cap over the fork stem - flat side down. 

Step 8. Finish tightening the IHC compression bolt with the 5mm Allen key until everything is secure and fork spins freely  

ITEMS REQUIRED- INSTALL IHC WITH LOW STACK HEADSET

IHC Fork, IHC- Shim & Bolt ;  Integrated scooter deck,1 1/8 Intergrated low stack headet & 5MM Allen key. 

Step 1. Slide one of the bearings from the Integrated headset over the fork arm- flat side down. 

Step 2. Insert fork into the bottom of the deck headtube. 

Step 3. Place the other bearing from the Integrated headset into the top of the deck headtube-flat side up. 

Step 4. Slide the low stack headset cap over the fork so it fits snug between the bearing and the fork. 

Step 5. Slide the IHC shim over the fork (tapered rim at top) so it sits on top of low stack headset cap. 

Step 6. Insert the IHC bolt into the top of the fork and hand tighten.

Step 7. Finish tightening the IHC compression bolt with the 5mm Allen key until everything is secure and fork spins freely